ALDM700 Series Driver
Replaces ALDM series driver
- 0-10VDC Analog Control for intensity ~10% to 100%
- Current Regulating
- 24VDC
- DIN Rail Mount
- PNP/NPN Strobe or Continuous Mode
ELECTRICAL:
| Input Voltage: | 24 VDC -0.5 / +4V |
| Input Current: | 1 Amp |
| Connection: | Screw terminals |
ALDM350/2 is compatible with the following lights:
LL111.5, LL26 – All Colors
RL3.5, RL5.5,RL8.5 – All Colors
DL7.25 – All Colors
MLL22 – All Colors
NOTE:
Jumper 24VDC to PNP Strobe Input or GND to NPN Strobe input for light to remain in constant “ON” state.
Strobe is Pulse Width Duration – Light will remain “on” for duration of signal or pulse.
Note: 24V power supply return and GND reference for 0-10V input must be connected to pin #2 (GND) of red connector.
Note: White, Black and Green wires are not used on ALDM700 Driver
Warning!!!
USE ONLY SPECTRUM ILLUMINATION LDM DRIVER WITH MONSTER LIGHTS. DO NOT CONNECT MONSTER LIGHTS DIRECTLY TO 24VDC!
